Now that you have got a plan you are ready for action. Solicit some help from a few choice friends you can work well and have a good time. If you know anyone who is project oriented that can be a huge plus. These people know how to get things done. They are used to taking large projects and breaking them into smaller tasks that can be tackled efficiently.
Meet at the hardware or home store as soon as it opens. Usually this is a quieter time for stores. If you wait till mid morning, especially on a Saturday, it can be hectic and you won't be back with your materials till after lunch and may run out of time in the day to finish your project. Take your categorized shopping list and delegate part of it to each person. Stick to your list and don't get side tracked looking at other interesting things. You are there to pick up your closet materials, not to plan a future project. Designate a meeting time at the checkout. Double check the materials to for size and quantity. When organizing your materials at the worksite they should be out of the way, but each item should be easily accessible. Putting everything in one pile can be frustrating when trying to find a specific item. You should now be ready to for the first phase, demolition.
Demolition: Put on your gloves and safety glasses. Be judicious with your use of force. The idea is to deconstruct your closet so that the surrounding walls are left in the best condition possible. Swinging wildly with a sledgehammer is likely to put a hole in a door or send debris flying through the window. Have one person do the demolition and the others form a bucket brigade to pass the wreckage out of the house. Remove all nails and screws that might be sticking out of the wall and thoroughly clean the area before starting to build.
Layout: Referring to your plans detail the closet layout on the closet walls. Measure off the floor where each shelf will go and use your level to scribe a line across the wall. Do this for the entire plan before starting any rebuilding. Draw vertical lines at the edges of each cabinet. At this time you may be able to make limited adjustments with shelving heights if you are unhappy with the layout. Next use the stud finder to locate and mark the center of each stud wherever you have layout lines. Studs will typically be found every 16".
Construct: Start by installing any cabinets you have decided on. Transfer the stud layout to the cabinets and drill one hole towards the top of the box for each stud. While someone holds the cabinet on the layout lines screw it to the wall. Fasten adjacent cabinets together first with clamps then with shorter 1 " screws to avoid blowing through the other side. Shelving may be held up by angle brackets, wood cleats, or plastic hanger clips. Since there will be a lot of weight on shelves and closet poles make sure all fasteners are driven into studs. With brackets in place you can measure up and cut your shelving. Follow the carpenter's mantra, "measure twice, and cut once." Measure up the front and the back of shelves since walls may be out of square.
Spackle up any damaged walls or holes you may have created during construction and pickup some classy matching wooden hangers to finish the project off.
About the Author: Ron Maier is the President of Everything Hangers, a leading online provider of clothes hangers and wooden hangers. For more information, please visit http://www.everythinghangers.com.
No comments:
Post a Comment