Installing electric showers to add beauty and comfort to a bathroom are few reasons why most homes have showers installed. Aside from these reasons, it can also make daily showers luxurious and enjoyable. However, to enjoy these things, one must acquire the right knowledge on how to do basic maintenance for the shower.
Maintenance can be as simple as precautionary measures for daily use and cleaning the parts of the shower which needs to be done at least once or twice a year.
Handset or shower head cleaning is done to prevent obstruction of water and maintain the force of shower spray by removing debris and scale. Cleaning can be done by washing the shower head with mild detergents or soap solutions. The shower plate must also be cleaned along with showerhead to avoid lowering the shower performance. After the process, the parts should be dried with soft clean cloth.
Before cleaning the inner parts of the shower, some safety information must be considered. First, is to switch off the electricity supplied to the shower and turn off the water supply by closing the isolated valve fitted along the main line. This measure should also be done when fixing the shower including:
1. Fitting the case correctly.
2. Changing damage casing.
3. Removing water inside the case.
4. When device emits smoke, undetermined odor, and odd noise.
5. When checking for changes with the performance of the device.
After turning off both the electrical connection and water supply, open the case carefully in such a way that the assembly of the case is not disrupted. Just in case doing these things may sound difficult or one is not competent in accomplishing the task, professional assistance is the only remedy.
One minor component that needs to be cleaned or renewed regularly is the filter. Debris or filtered materials from the water may hinder the normal flow of water. In some cases, devices are broken due to excessive dirt and debris causing water to leak.
After cleaning the filter and other inner parts, do not over tighten the screws of the filter and the case. Before reinstalling the device and electricity, make sure that the main water supply is sealed. Refit the case to its precise location. When reinstallation is done, turn on water connection and electricity supply to test the performance of shower. Testing should be done with cold water. Make sure that electrical connection is secured including the grounds. If any problem may arise during the maintenance, contact to the dealer of the shower or service centre to seek for assistance.
Precautions that should be considered for daily maintenance and use are following:
-Never put shampoo bottle or soap on the unit as it may slip into the device.
-After using the shower, turn off the isolating switch.
-Switch off the device immediately when water ceases to flow.
-Right after any use of the device, make sure to flush remaining water to wash away debris and waste.
-Always check the temperature of water by hand before stepping under the showerhead to prevent burns.
-Do not use abrasive or aggressive products when cleaning as it may damage the unit
These are simple precautionary measures that when properly taken can expand the lifespan of the device. Users must always remember that professional help is always the best solution when encountering issues with devices such as the shower.
If you are looking for more information then feel free to visit electric showers and electric power showers.
Missing Attic Insulation
No comments:
Post a Comment